fire_house_d-5160-2009
360° (0) Interactive (0)

Product description

Customer-specific solution
The fire house is designed in accordance with customer-specific requirements. Almost every object can be simulated when selecting the locations of the fire. Different building areas can be operated independently of each other. The simulation system can also be retrofitted into an existing building. We coordinate all structures up to the operational handover to the customer.
Realistic training conditions
Confronting the trainees with real flames, strong heat, high humidity, severely restricted visibility due to thick smoke, and stress, the Dräger training system simulates emergencies through realistic practical experiences. An automatic extinguishing success control immediately shows the trainees whether they have fought the fire correctly.
Control technology
The system is operated via a control panel with push buttons and a panel monitor which indicates system status. Alternatively, a control is possible via a PC. In this case the fire simulation system with all its fire locations is displayed on the monitor. The operator can enable the fire locations individually. All sensors, motors, valves etc. are connected directly via a bus system to a programmable logic controller (PLC). The fire locations are ignited by the trainer using wireless remote control after having been enabled at the control panel or PC. Flame height can also be set using this remote control. Each fire location is triggered individually.
Training versions
The fire houses permit a multitude of different simulations, including flash-over, such as the following fire scenarios:
  • Gas meter or gas cylinder
  • Shelf
  • Cable duct
  • Ceiling
  • Window
  • Stairway
  • Kitchen
  • Workbench or settee
  • Roof
  • Outdoor gas tank
Every real object can practically be simulated as a fire location.
Safe training conditions
The highest safety level of the individual fire locations and the training system as a whole is secured by the implementation of the safety requirements and the Dräger monitoring and control systems. Every system is tested by the TÜV before being handed over to the customer.
Environmentally friendly
The Dräger fire simulation systems are operated with clean burning propane gas.

Product Information

Downloads

Screensaver + Wallpaper

draeger safety

Screensaver: Draeger Safety

wallpaper1

Firetraining Systems - Wallpaper1

wallpaper2

Firetraining Systems - Wallpaper2

wallpaper3

Firetraining Systems - Wallpaper3

Accessories

bangbox.jpg

Bang Box

The experiment box demonstrates the flammability of different media or the released energy at the press of a button.

testboxaquarium.jpg

Experiment box Aquarium

The experiment box enables diverse simulations of flammable gases. The participants can observe the typical expansion patterns of the fire to better estimate future risk potentials and allow the trainees to use the best theoretical preparation for the flash-over training in the container.

firetrainingcontainer_st-4592-2006.jpg

Extinguishing success control + monitoring

Not enough water for fire fighting or at the wrong location? All Dräger fire sites can optionally be equipped with an automatic extinguishing success control. This allows you to specify automatic scenarios dependent on the success of the extinguishing action.

spezialeffekte_st-2436-2006.jpg
Fog machine

In a short while low contrast objects become invisible and high contrast objects are being masked. This is possible for up to a viewinig distance below 2m and a 100% masking of high contrast objects.

ucf1600_ST-1357-2007.jpg
Dräger UCF 1600

Designed for the toughest working conditions and combining state-of-the-art thermal imaging with traditional Dräger quality standards.

ucf3200_ST-1367-2007.jpg
Dräger UCF 3200

With an even more brilliant resolution and a larger field of view than the UCF 1600, the UCF 3200 is the first choice for high-end applications in thermal imaging technology.

Related Products

firetrainingcontainer_st-6736-2006.jpg
Fire container (stationary)

The safety and health for fire fighters have priority when fighting fires. In the fully equipped Dräger fire container it is possible to train for all potential fire situation as if they were real.

aircraftfiresimulation_st-2462-2006.jpg
Aircraft fire training systems

On the ground, a fire service that is well trained using the Dräger aircraft fire training system is the first line of defence during an emergency.

aircraftfiresimulation_st-4748-2007.jpg
Surface fires

Practical training: Spilled and ignited kerosene are amongst the most dangerous situations when fighting aircraft fires. Dräger training for fighting liquid fires (spillage fires) offers students the ability to master such situations in a real emergency.