Dräger X-zone 5000
Images (10) Videos (0)
360° (1) Interactive (0)

Product benefits

Innovative area monitoring
The Dräger X-zone 5000 transforms the Dräger personal gas detection instruments X-am 5000/5600 into innovative area monitoring devices for a wide range of applications. A patented combination for increased safety – in addition to the personal air monitors carried on the body, these area monitors are positioned where gas hazards are expected.
Clear warning
Even from a distance, the illuminated green LED ring indicates that the air is free of toxic and combustible gases. Upon detection of gas hazards, the LED color changes from green to red, thus providing a clear visual warning that gas is present. Additionally, a loud and highly audible evacuation alarm is emitted. The Dräger X-zone 5000 gas entry is arranged that the gas can diffuse into the Dräger X-am 5000/5600 from all sides.
Wireless fenceline
Up to 25 Dräger X-zone 5000 can be automatically interconnected to form a wireless fenceline. The interconnection of the area monitoring devices allows for rapid establishment of safety networks for larger areas. A Dräger X-zone 5000 detecting a gas alarm transmits the alarm signal to all interconnected units. A red flashing master alarm in the mother unit detecting gas contrasts with red/green flashing alarms of the connected daughter units providing simple recognition of alarm status and the actual location of the hazard.
Area monitoring - even with a pump
An optional integrated pump allows for continuous monitoring of areas during pump operation. This provides continuous monitoring of confined spaces and locations which are difficult to access – from a distance of up to 45 m (150 ft).
Continuous operation for up 120 hours
Two different types of rechargeable batteries enable the Dräger X-zone 5000 to be adapted to a variety of applications: the 12 Ah battery, with a total weight of only 7 kg (15 lbs.), offers continuous operation for up to 60 hours; and the alternative 24 Ah battery, with a total weight of 10 kg (22 lbs.) provides up to 120 hours of continuous operation – a complete working week.
Dräger switching station X-zone Switch On or Switch Off
The accessory Switch On or Switch Off box provides a cost-effective, fast and easy way of increasing safety during external work in Ex-zone 1. In the event of an alarm, the Switch Off box automatically cuts off the power supply in just seconds, for instance, to a welder. In the case of danger, the Switch On box responds immediately by activating, for instance, a traffic light for access control or ventilation. The corresponding switching station can be easily connected to the Dräger X-zone 5000 via the potential-free alarm contact.
Other benefits
  • 360° gas entry
  • approval for Ex-zone 0 (with Switch On or Switch Off for Ex-zone 1)
  • daily function test and calibration not required after single on-site testing
  • individually configurable with the Dräger CC-Vision PC software (e.g. alarm frequency)
  • inductive charging station: easy and convenient non-contact charging

Product Information

Accessories

d-23626-2009

Bump test adapter

For function tests

d-27768-2009

Alarm damper

For use within bump tests

d-23631-2009

Socket

For measurements of light gases

d-23634-2009

Induction charger

Allowing easy charging

d-1568-2010

Plug- in charger

100 - 240 V

d-10391-2009

Float probe

With 5 m or 16.4 ft. viton hose

d-1571-2010

Hose set

Consisting of water trap, dust and water filter

Dräger Software Packages
Dräger Software Packages

Save measurement results, professionally configure gas detection instruments and viewing performance data – all that is possible with the tailor-made Dräger software.

calibration-gas_st-5080-2005.jpg
Calibration gas and accessories

Calibration of equipment will ensure safe operation and functionallity of equipment and will also meet with the applicable regulations and codes of practice. Various calibration options are available to provide this facility.

System Components

Dräger X-am 5000
Dräger X-am® 5000

The Dräger X-am 5000 belongs to a new generation of gas detectors, developed especially for personal monitoring applications. This 1 to 5-gas detector reliably measures combustible gases and vapors as well as O2 and harmful concentrations of O3, Cl2, CO, CO H2-CP, CO2, H2, H2S, HCN, NH3, NO, NO2, PH3, SO2, COCl2, organic vapors, Odorant and Amine.

Dräger X-am 5600
Dräger X-am® 5600

Featuring an ergonomic design and innovative infrared sensor technology, the Dräger X-am 5600 is the smallest gas detection instrument for the measurement of up to 6 gases.

bump-test_st-1526-2007.jpg
Dräger Bump Test Station

Easy to use, stand-alone and portable. With the Bump Test Station, functionality tests of gas detection and warning devices can be carried out easily and quickly.

e-cal_st-574-2005.jpg
Dräger E-Cal

Check, control and calibration of portable gas measuring devices at any time: Dräger E-Cal, the automatic test and calibration system is made for it.

Related Products

x-am-7000_st-131-2004.jpg
Dräger X-am® 7000

Dräger X-am 7000 is the innovative solution for the simultaneous and continuous measurement of up to five gases. It is the ideal companion in a variety of applications where the reliable detection of oxygen, toxic and combustible gases and vapours is necessary.

Literature

Brochure: DrägerSensor® & Portable Instruments Handbook (PDF)

This handbook is intended to be a reference for the users of portable gas detection. The information has been compiled to the best of our knowledge from the relevant references.

Brochure: Specialists for your safety (PDF)

Portable gas detection from Dräger.